Please note that taxes may be applied at checkout based on your location

• Environmental Health & Safety (65)
• SCORM Courses (18)

• 16 Hour EM-385-1-1 - Safety and Health Requirements for USACE

  

  The 16-hour EM 385-1-1 course delivers essential instruction based on the USACE Safety and Health Requirements Manual. It is intended for non-supervisory personnel, including contractors, military members, and government employees who perform work on U.S. Department of Defense construction or service projects.

  $175.00

• 16 Hour HAZWOPER Upgrade Online

  

  This course upgrades a 24-hour HAZWOPER certification to full 40-hour status. It expands on advanced topics such as site operations, hazard control techniques, air monitoring, emergency response, and regulatory compliance to meet OSHA requirements for full-site workers.

  $135.00

• 24 Hour EM-385-1-1 - Safety and Health Requirements for USACE

  

  This 24-hour EM 385-1-1 course provides expanded coverage of safety and health standards required by the USACE. It is designed for supervisory personnel such as managers, foremen, supervisors, and team leaders responsible for overseeing work on Department of Defense–contracted projects.

  $235.00

• 24 Hour HAZWOPER Online

  

  Designed for workers with limited hazardous waste site exposure, this course covers essential OSHA HAZWOPER requirements. Training includes hazard communication, chemical safety, site control, PPE, decontamination, and emergency procedures needed to safely perform assigned duties in regulated environments.

  $165.00

• 40 Hour EM-385-1-1 - Safety and Health Requirements for USACE

  

  This comprehensive course provides detailed training on USACE EM 385-1-1 safety standards. Topics include accident prevention plans, hazard analysis, fall protection, PPE, confined spaces, excavation safety, and contractor safety responsibilities required on federal projects.

  $325.00

• 40 Hour HAZWOPER Online

  

  This HAZWHOPER course provides in-depth training for workers engaged in hazardous waste operations and emergency response. Topics include hazard identification, toxicology, site characterization, air monitoring, PPE selection, decontamination procedures, medical surveillance, and emergency response planning to ensure safe and compliant work practices.

  $220.00

• 8 Hour EM-385-1-1 - Safety and Health Requirements for USACE

  

  This 8-hour EM 385-1-1 course provides a focused review of key safety principles outlined in the U.S. Army Corps of Engineers (USACE) Safety and Health Requirements Manual. It is designed to serve as annual refresher training for individuals who have previously completed the 40-, 24-, or 16-hour EM 385-1-1 training and are working on Department of Defense–contracted projects.

  $125.00

• Accident Investigation

  

  IACET CEUs Awarded

  CEUs: 0.2

  90 mins*

  Welcome to this online course - Accident Investigation - which will give you the information you need to effectively analyze an accident event by uncovering the cause of the injury, and the immediate, underlying and root causes of the accident. You’ll also develop the skills needed to analyze and evaluate your Safety Management System (SMS) for root causes. Beyond this you’ll see why the question of fault and possible discipline is often irrelevant and inappropriate when conducting an accident investigation.

  Download PDF

  

  $59.00

• Active Shooter

  

  60 mins*

  This online course encourages proactive thinking and awareness while providing practical safety advice and strategies for active shooter situations. All tactics and procedures are based on currently accepted guidelines, bearing in mind each active shooter situation is completely different.

  Download PDF

  

  $59.00

• AED/CPR Essentials

  

  35 mins*

  This course covers the topics of both Cardiopulmonary Resuscitation (CPR) and the use of Automated External Defibrillators (AEDs). The course guides you through crucial techniques required to administer CPR and the steps needed to be able to use an AED effectively and safely. It also discusses the need for initiating a quick emergency response and the legal protections offered by Good Samaritan laws. Please note that this course covers theory only and it is recommended that a practical course in AED/CPR is obtained for a full knowledge and understanding of the topic.

  Download PDF

  $35.00

• Aerial Scissor Lifts

  

  IACET CEUs Awarded

  CEUs: 0.1

  30 mins*

  This course will show how aerial scissor lifts can be operated safely in a workplace environment along with how different locations and terrains require additional safety precautions. It covers the different types of scissor lifts and how they should be treated and operated accordingly. The course concludes by covering the requirements of inspection and maintenance of the vehicle.

  Download PDF

  Also available as part of a bundle

  $35.00

  Also available as part of a bundle

• Asbestos Hazards Suite

  

  Asbestos can be deadly without proper controls and release procedures. In this suite, you will learn how to identify and avoid asbestos as well as how to control your exposure to it. This suite is ideal for people who work in environments that contain or have the potential to contain asbestos as well as their supervisors.

  $59.00

• Back Injury Prevention

  

  IACET CEUs Awarded

  CEUs: 0.2

  90 mins*

  In this course, we’ll cover the major issue of back pain and injuries, including how injuries happen, and how they can be treated and prevented. We'll start with back injury statistics, and move on to an examination of the structure, regions, and functions of the spine. You'll learn about ergonomics and back pain, and how back pain is diagnosed and treated. The course contains practical advice around how to keep your back healthy and you'll be shown a range of proven manual handling techniques and we’ll discuss some of the alternatives to lifting which may be available in your workplace.

  Download PDF

  Also available as part of a bundle

  

  $59.00

  Also available as part of a bundle

• Biohazards

  

  IACET CEUs Awarded

  CEUs: 0.2

  90 mins*

  This online course covers major issues relating to biohazards in the workplace. It starts with an overview showing how to identify, manage, control, and prevent workplace biohazards. You'll learn the simple, effective method of conducting a risk assessment to meet biohazard contamination prevention objectives and we'll show you how to identify biological hazards and develop a Control Plan. We'll also cover a range of workplace biohazards. Each section includes a definition, and details of symptoms and treatments.

  Download PDF

  

  $59.00

• Bloodborne Pathogens

  

  IACET CEUs Awarded

  CEUs: 0.1

  60 mins*

  This course contains valuable, life-saving information for anyone likely to be exposed to blood or potentially infectious bodily fluids at work. Even if you’re not normally exposed to blood or bodily fluids, this course will increase your understanding of the issues, should you ever have to deal with a workplace accident or emergency. Please be aware that this course contains simulated depictions of injuries that are relevant to the topic and are intended to support the learning .

  Download PDF

  

  $59.00

• Caught In / Between Hazards

  

  IACET CEUs Awarded

  CEUs: 0.1

  60 mins*

  This course looks at being caught in or between hazards in the workplace and the steps you can take to prevent it. The course starts by diving into what a caught in or between hazard is and some case studies to review. You will review some of the latest industry statistics relating to this Focus Four topic and some of the most common hazards relating to caught in or between hazards. You will learn the different types of caught in or between hazards and some real world examples of their impact. Finally, you will learn about the role that employers play in preventing incidents in the workplace.

  $35.00

• Compressed Gases

  

  IACET CEUs Awarded

  CEUs: 0.1

  55 mins*

  This online course will provide a general overview of the important issues surrounding compressed gas safety. It looks at the three types of compressed gases-Liquefied gases, Non-liquefied gases and Dissolved gases. You'll learn about why and how gases are compressed, along with industry terminology. We'll also cover the main types of compressed gas cylinder connections, valves, and pressure regulators. Other topics include the four steps of a risk assessment, the hierarchy of control and safety regulations relating to the use and safe storage of compressed gases.

  Download PDF

  

  $59.00

• Confined Space Entrant, Attendant and Supervisor

  

  IACET CEUs Awarded

  CEUs: 0.1

  90 mins*

  This course covers the identification, classification, control, monitoring, and rescue requirements for confined spaces in the workplace, in line with Occupational Safety and Health Act (OSHA) standards. We'll look at general workplace hazards, including chemical reactions and toxic exposure, and how to deal with them proactively using hazard controls. There's information on safety and supervision responsibilities and we'll look at the characteristics and hazards of confined spaces. Finally, you'll be taken through the mechanics and benefits of team working in confined spaces

  Download PDF

  Also available as part of a bundle

  

  $95.00

  Also available as part of a bundle

• Crane Safety

  

  IACET CEUs Awarded

  CEUs: 0.2

  60 mins*

  This course covers the essential techniques of crane rigging, including directing the work on the ground, and ensuring the safe, efficient conduct of crane operations. The course will look at crane stability and safety, including outriggers, counterweights and movement. There'll be a wide range of information on sling safety and information on how to inspect rigging hardware links, shackles, end-fittings, wire rope clips and hooks. Finally, the course will cover a full range of hand signals used to communicate between the ground and the crane operator.

  Download PDF

  $115.00

• Crane Safety and Basic Rigging Training Suite

  

  Rigging involves moving heavy loads with slings, chains, hoists, and other specialized equipment. Cranes can be dangerous if used improperly, which is why the signal person’s instructions are critical and must be followed by the operator. Both roles are essential to safe crane operation. The Crane Signalling Awareness course teaches the basic skills needed to use hand or voice signals to guide mobile and tower crane movements, along with key guidelines for effective voice communication.

  $59.00

• Crystalline Silica Safety

  

  IACET CEUs Awarded

  CEUs: 0.1

  60 mins*

  This online course will increase understanding and offer practical advice to help deal with the hazards caused by silica dust in the workplace. The course starts by highlighting the industries and activities where silica dust is a health problem and the responsibilities of both employers and workers according to the OSHA regulations. You'll learn the three methods of assessing exposure to silica and there will also be practical advice on keeping samples, lab reports, medical exam reports, and training documentation.

  Download PDF

  $65.00

• Demolition Safety

  

  IACET CEUs Awarded

  CEUs: 0.1

  60 mins*

  This Demolition Safety course starts with basic definitions, then describes OSHA regulations along with demolition risks and the current trends in demolition such as remote controls machines, recycling and sustainability. Please be aware that this course contains animated depictions of accidents and injures, these are used to illustrate the importance of the training and the seriousness of incidents that can occur.

  Download PDF

  

  $60.00

• DOT/EPA Hazardous Materials Suite

  

  This suite covers key EPA and DOT regulations. The first half explains the Resource Conservation and Recovery Act (RCRA), which establishes requirements for managing solid and hazardous waste from generation through transport to final treatment or disposal. The second half focuses on hazardous materials transportation, highlighting the risks these materials pose and providing trainees with essential knowledge of regulations enforced by the DOT’s Pipeline and Hazardous Materials Safety Administration.

  $75.00

• Electrical Safety Awareness

  

  IACET CEUs Awarded

  CEUs: 0.1

  60 mins*

  This is an awareness level safety course on Electrical safety fundamentals. The course starts by diving into the foundational concept of electrical hazards and looks at the various types. Following this, the course reviews effective protective measures, safe work practices, and the use of personal protective equipment to prevent electrical injuries on the job site.Finally, you'll learn that employers have a responsibility to protect workers from electrical hazards, and to provide employees with the necessary training and equipment.

  Download PDF

  $35.00

• Electrocution Hazards

  

  IACET CEUs Awarded

  CEUs: 0.1

  60 mins*

  This course provides you with the essential training for electrical hazards on Construction sites. The course starts with an introduction into the complex and critical nature of electrical hazards in the workplace. You'll then get to learn about the major types of electrocution hazards and the critical precautions necessary to mitigate the risks associated with power lines in construction.You'll then get to further explore essential strategies for electrocution hazard prevention and finally, you will learn about the responsibilities that employers must take to ensure workplace safety.

  Download PDF

  $35.00

• Emergency Evacuation

  

  IACET CEUs Awarded

  CEUs: 0.1

  45 mins*

  Welcome to this Emergency Evacuation course, where you'll learn how to respond safely and effectively to a range of workplace evacuation situations. You'll learn how to write an Emergency Evacuation Plan and cover staff responsibilities, along with OSHA best practices. You'll learn how to best attend to injured people and learn why it's important to have appropriate personal protective equipment readily available during an emergency. There's important advice on how to shut down gas, electrical systems or other critical equipment and finally we'll cover medical emergencies.

  Download PDF

  $35.00

• Exit Routes, EAPs, FPPs and Fire Protection

  

  IACET CEUs Awarded

  CEUs: 0.1

  60 mins*

  This course begins with an in-depth examination of essential aspects and protocols of workplace exit routes and explores how to effectively implement, understand, and maintain Emergency Action Plans in the workplace, ensuring an environment that is secure, well-prepared, and equipped to handle emergencies affecting all staff members. Further, you will learn the essential components of a Fire Prevention Plan and finally, this course will go through critical fire safety practices, preventative strategies, and emergency response techniques.

  Download PDF

  $35.00

• Eye and Face Protection

  

  IACET CEUs Awarded

  CEUs: 0.1

  30 mins*

  This course provides you with an introduction to eye and face protection in the workplace.The course starts with some eye and face injury statistics and then following this, the course covers the four main groups of PPE that protect against those injuries.Next, it looks at some common workplace hazards that can lead to eye and face injuries and finally, the course finishes by setting out the steps you should take were an eye or face emergency to occur in your place of work.

  Download PDF

  Also available as part of a bundle

  

  $35.00

  Also available as part of a bundle

• Fall Protection

  

  IACET CEUs Awarded

  CEUs: 0.1

  60 mins*

  This course is designed to cover fall protection basics and how to stay safe while working at height. This course is designed to cover fall protection basics and how to stay safe while working at height. It discusses the various fall protection regulations set out by the Occupational Safety and Health Administration, OSHA. You'll see accident and injury statistics and learn the difference between fall protection and fall prevention. Safe Working practices will be discussed and finally you'll look at the importance of rescue plans designed to rescue people from any height, in any situation.

  Download PDF

  Also available as part of a bundle

  

  $60.00

  Also available as part of a bundle

• Fire Extinguisher

  

  IACET CEUs Awarded

  CEUs: 0.1

  30 mins*

  This short course provides you with an introduction to the safe use of fire extinguishers in the workplace. It explains why fire extinguisher training is so important, different classes of fire, and explores common fire hazards. It looks at some workplace statistics, before diving into the legal aspects.The course explores the essential parts of an extinguisher and details how they should be inspected, maintained, and stored. It finishes by showing how to use a fire extinguisher, alongside a list of do's and don'ts, and what you should do once you've finished with a extinguisher.

  Download PDF

  

  $35.00

• Fire Prevention

  

  IACET CEUs Awarded

  CEUs: 0.1

  90 mins*

  This course covers key aspects of fire safety and prevention in the workplace. It'll cover statistics relating to fire injuries and deaths, and examine a case study. You'll learn about the factors necessary for fire to start and spread and a look at Emergency Action Plans, Fire Prevention Plans and the various types of Evacuation procedures. There's practical advice on the handling and storage of flammable liquids and materials and it also looks at electrical fires. Finally, the course will cover why good housekeeping techniques are essential for fire safety.

  Download PDF

  Also available as part of a bundle

  

  $50.00

  Also available as part of a bundle

• First Aid Suite

  

  Would you know how to respond if someone nearby passed out or if you found a friend with a serious cut or burn? Your actions can keep a victim alive and stable while waiting for emergency help. By assessing the situation, calling for assistance, and taking proper steps based on their condition, you may save a life. This suite reviews key first aid skills, including CPR, bleeding control, and poison response. It is useful at home, at work, and everywhere.

  $29.99

• General Industry Safety Orientation

  

  42 mins*

  This course provides you with a comprehensive introduction to Safety in the workplace within General Industry. It explores the principles of workplace safety and emphasizes the importance of addressing hazards. The course guides you through the intricacies of risk assessment and talks about safety protocol and emergency measures. You'll be introduced to Health and safety practices, operational and vehicle safety. Finally the course discusses the importance of PPE and its use.

  Download PDF

  $35.00

• Hand and Power Tools

  

  IACET CEUs Awarded

  CEUs: 0.1

  30 mins*

  This short course provides you with an introduction to Hand and Power Tools. This course starts by examining the fundamental techniques for the safe and proficient use of hand tools, aiming to maximize accuracy and ensure safety in everyday construction activities. Then it dives into the critical safety measures and operational procedures for power tools. This section is designed to equip employees with the knowledge to enhance their work efficiency while maintaining the highest standards of safety.

  Download PDF

  Also available as part of a bundle

  

  $35.00

  Also available as part of a bundle

• Hazard Communication

  

  IACET CEUs Awarded

  CEUs: 0.2

  120 mins*

  This course covers the key aspects of Hazard Communication - or HazCom - and shows how a HazCom programme can protect the health and safety of workers using chemicals in US industry. It looks in detail at the correct completion of Safety Data Sheets and also discusses the importance of hazardous chemical labelling systems. Finally the course covers employee HazCom training, and HazCom Program Maintenance.

  Download PDF

  Also available as part of a bundle

  

  $69.00

  Also available as part of a bundle

• HAZMAT Transportation Suite

  

  In the U.S., millions of tons of hazardous materials are shipped daily, even though they may be poisonous, flammable, explosive, toxic, or corrosive. This suite gives learners essential knowledge of DOT rules from the Pipeline and Hazardous Materials Safety Administration. It covers reading the Hazardous Materials Table, completing shipping paperwork, and marking, labelling, and placarding shipments. It is ideal for anyone who offers or transports HAZMAT.

  $129.00

• HAZWOPER 8-Hr Refresher Training

  

  Workers in hazardous waste operations and emergency response (HAZWOPER) face complex challenges that impact the safety of people and the environment. These courses teach how workers can protect themselves while helping others during hazardous material incidents. The suite is ideal for industrial and laboratory employees, maintenance staff, and first responders. It provides 7 hours of online instruction and, with job aids and tests, can meet OSHA’s 8-hour requirement.

  $65.00

• Health Hazards in Construction

  

  IACET CEUs Awarded

  CEUs: 0.2

  90 mins*

  This online course takes an overview of the hazards, risk factors, risk assessments, controls, and regulations that apply to the construction industry. You’ll learn about OSHA regulations , risk assessments and effective safety procedures. The course looks at various hazards including mechanical, chemical, biological, ergonomic and environmental. We'll discuss how to protect yourself against workplace hazards, including personal protective equipment and training, plus a range of effective safety tips.

  Download PDF

  $35.00

• Heat and Cold Stress

  

  80 mins*

  This course deals with Heat and Cold Stress and how to handle situations where someone falls victim to, or is in danger from, temperature extremes.

  Download PDF

  $60.00

• Housekeeping Safety

  

  IACET CEUs Awarded

  CEUs: 0.1

  30 mins*

  The course starts by diving into the concept of housekeeping safety and its importance in the workplace. You’ll get to review common housekeeping hazards and learn how to best mitigate them and you’ll be guided through implementing and maintaining effective housekeeping practices that keep you and your coworkers safe. Finally, we will delve into the importance of a safety culture and continuous improvement in housekeeping practices.

  Download PDF

  $35.00

• Industrial Hygiene

  

  30 mins*

  This course introduces you to the core principles of Industrial Hygiene, emphasizing its crucial role in workplace safety. You'll delve into the various types of workplace hazards, exploring the five primary categories: chemical, physical, biological, ergonomic, and psychosocial. The course then takes you on a journey to explore the techniques for evaluating hazards, investigating the structured approach of the hierarchy of controls to mitigate risks and then concludes with addressing the key steps and components required to develop a thorough Industrial Hygiene program.

  Download PDF

  $35.00

• Introduction to Forklifts and Safe Operation

  

  IACET CEUs Awarded

  CEUs: 0.1

  45 mins*

  This comprehensive introduction to Forklifts and Safe Operation course will help you understand when and how to operate your forklift safely in the workplace. The course starts by analyzing the different classes of powered industrial trucks and the different types of fuel that make forklifts run. You will get to learn about some of the key principles that help you safely maneuver your forklift such as the Stability Triangle, the Fulcrum Principle and forklift load capacities. Finally, you will learn about some of the most common hazards associated with forklift operation

  Download PDF

  

  $55.00

• Introduction to OSHA

  

  IACET CEUs Awarded

  CEUs: 0.2

  120 mins*

  This comprehensive Introduction to OSHA course provides you with crucial training on workplace safety and health standards. This course is meticulously crafted to introduce you to the Occupational Safety and Health Administration's (OSHA) standards, equipping you with the necessary know-how to uphold a secure and healthy workplace for yourself and your colleagues.

  Download PDF

  $35.00

• Job Hazard Analysis

  

  IACET CEUs Awarded

  CEUs: 0.2

  90 mins*

  This course focuses on Job Hazard Analysis (JHA) as a way of identifying workplace hazards before they can cause accidents or illnesses. It begins by looking at the role of OSHA, and covers the benefits of performing Job Hazard Analysis. It then looks at the actions you should take before beginning a JHA including how you can involve the workforce. We'll cover the five key stages of JHA, and look at how to choose the appropriate level of control and develop a hazard control plan. Finally we'll discuss the importance of JHA and how they should be completed.

  Download PDF

  

  $59.00

• Ladder Safety

  

  IACET CEUs Awarded

  CEUs: 0.2

  90 mins*

  This online course shows the actions you need to take to ensure the safe use of ladders and stepladders in the workplace. We'll examine OSHA ladder standards and also look at ladder risk assessments. We'll discuss OSHA's Guidelines for safe ladder structures, how to choose the right ladder for the job and talk about practical information for inspecting ladders.You'll learn how to position a ladder at a safe angle and how to deal safely with overhangs and extension ladders. Finally the course covers fall protection systems and their importance when using a ladder.

  Download PDF

  Also available as part of a bundle

  

  $49.00

  Also available as part of a bundle

• Lead Safety

  

  IACET CEUs Awarded

  CEUs: 0.1

  30 mins*

  This course starts by explaining what lead is, where it is found and what products it is used in. It then explores how workers are exposed to lead and how it can affect their health.This is followed by a look at OSHA and other regulatory agencies that regulate lead and lead exposure. Next, the course explores what workers can do to stay safe. Finally, you finish by learning how to develop and maintain a written program along with the requirements for warning signs, labels, safety data sheets, employee information and training.

  Download PDF

  $35.00

• Lock Out / Tag Out (LOTO)

  

  IACET CEUs Awarded

  CEUs: 0.1

  60 mins*

  This course provides an overview of Lockout/tagout (LOTO) - the safety practices and procedures that ensure dangerous machines are properly shut off during service, repair or maintenance. We'll also describe the key benefits of LOTO for the workforce, management and companies. We'll explain the LOTO standards and examine the roles of managers, supervisors, outside contractors, and all employees. Finally, you'll be introduced to the practicalities of LOTO, including tools and written procedures, before we walk you through a step-by-step exploration of a typical LOTO situation.

  Also available as part of a bundle

  

  $60.00

  Also available as part of a bundle

• Machine Guarding

  

  IACET CEUs Awarded

  CEUs: 0.1

  60 mins*

  The course will cover everything you need to know about keeping your machines safe. Exposure to unguarded or inadequately guarded machines can cause severe injury or death if you operate or maintain machinery. This training session on machine guarding includes essential information about protecting yourself against serious injury when working with powerful machines.

  Download PDF

  Also available as part of a bundle

  

  $35.00

  Also available as part of a bundle

• Material Handling - Construction

  

  IACET CEUs Awarded

  CEUs: 0.1

  60 mins*

  This course provides you with an introduction to Material Handling in Construction. It starts with an in-depth overview of regulations, and helps you understand these intricate rules. It then explores the critical practices of material storage on construction sites. You will learn how to master the art of organization while upholding OSHA safety standards. Following this, the course leads you through the intricacies of rigging equipment operation. Finally we’ll learn about the essential training methods focused on mitigating hazards.

  Download PDF

  $35.00

• Material Handling - General Industry

  

  IACET CEUs Awarded

  CEUs: 0.1

  60 mins*

  This course provides you with an introduction to Material Handling in General Industry. The course starts with an exploration of fundamental concepts in material handling, emphasizing the importance of identifying potential hazards. You will then get to review various material handling methods and hazards associated with them. We will dive into detailed safe handling practices, with a focus on proper techniques for lifting, storage, and mechanical handling to minimize injuries. Finally, we will review employers’ responsibilities in ensuring a safe working environment when handling materials.

  Download PDF

  $35.00

• Mobile Elevated Work Platforms

  

  When you cannot move work to ground level, mobile elevated work platforms, or MEWPs, such as aerial, scissor and vertical mast lifts, may be an appropriate solution. Each type has its own unique characteristics and safety strategies of which you need to be aware. You will receive hands-on training about the specific equipment you will use, but this course will lay the groundwork by giving you an overview of some universal considerations for mobile elevated work platforms. This course is ideal for people who use or manage others who use mobile elevated work platforms.

  $29.99

• Mobile Elevated Work Platforms (Spanish) Plataformas móviles para trabajos en altura

  

  Cuando no pueda trasladar un trabajo al nivel de suelo, las plataformas móviles para trabajos en altura, o MEWP, pueden ser una solución adecuada, por ejemplo, elevadores aéreos, de tijera y de mástil vertical. Cada tipo de plataforma posee sus propias características únicas y estrategias de seguridad que usted debe conocer.

  $29.99

• NFPA 70E Suite

  

  NFPA 70E was created to protect people and property from the hazards associated with electricity. The courses in this suite will help learners recognize electrical hazards, apply electrical standards, use electrical safety programs and prevent or address electrical safety violations. Ideal learners include people in all industries, particularly supervisors, electrical maintenance and installation workers and safety managers.

  $59.00

• OSHA 10: Construction Industry Outreach Training Course

  

  IACET CEUs Awarded

  CEUs: 1.0

  600 mins*

  This fully online OSHA 10-Hour Construction Outreach course provides essential safety training for entry-level workers. Topics include fall protection, PPE, electrical safety, and hazard recognition. Participants who complete the training will receive an official OSHA 10 DOL card issued by the U.S. Department of Labor.

  Download PDF

  $69.00

• OSHA 10: Construction Industry Outreach Training Course (Actively Proctored)

  

  IACET CEUs Awarded

  CEUs: 1.0

  600 mins*

  This fully online OSHA 10-Hour Construction Outreach course is proctored to satisfy New York law. It covers fall protection, PPE, scaffolding, and hazard recognition for construction workers. Participants who complete the training will receive an official OSHA 10 DOL card issued by the U.S. Department of Labor.

  Download PDF

  $69.00

• OSHA 10: Construction Industry Outreach Training Course Spanish

  

  IACET CEUs Awarded

  CEUs: 1.0

  600 mins*

  Este curso en línea de 10 horas de Capacitación en Construcción de OSHA, completamente en español, cubre protección contra caídas, equipo de protección personal (EPP), seguridad eléctrica y riesgos en el lugar de trabajo para los trabajadores de la construcción. Los participantes que completen la capacitación recibirán una tarjeta oficial OSHA 10 emitida por el Departamento de Trabajo de los Estados Unidos (DOL)..

  Download PDF

  $69.00

• OSHA 10: Construction Industry Outreach Training Course Spanish (Actively Proctored)

  

  IACET CEUs Awarded

  CEUs: 1.0

  600 mins*

  Este curso en línea de 10 horas de Capacitación en Construcción de OSHA, completamente en español, cuenta con supervisión para cumplir con la ley del estado de Nueva York. Proporciona capacitación sobre protección contra caídas, andamios, equipo de protección personal (EPP) y prevención de riesgos. Los participantes que completen la capacitación recibirán una tarjeta oficial OSHA 10 emitida por el Departamento de Trabajo de los Estados Unidos (DOL).

  Download PDF

  $69.00

• OSHA 10: General Industry Outreach Training Course

  

  IACET CEUs Awarded

  CEUs: 1.0

  600 mins*

  This fully online OSHA 10-Hour General Industry Outreach course provides training on PPE, electrical safety, hazard communication, and ergonomics for entry-level workers. Participants who complete the training will receive an official OSHA 10 DOL card issued by the U.S. Department of Labor.

  Download PDF

  $69.00

• OSHA 10: General Industry Outreach Training Course (Actively Proctored)

  

  IACET CEUs Awarded

  CEUs: 1.0

  0 mins*

  This fully online OSHA 10-Hour General Industry course is proctored to satisfy New York law. It trains workers in hazard communication, machine safety, PPE, and ergonomics. Participants who complete the training will receive an official OSHA 10 DOL card issued by the U.S. Department of Labor.

  Download PDF

  $69.00

• OSHA 10: General Industry Outreach Training Course (High-Tech/Semiconductor)

  

  IACET CEUs Awarded

  CEUs: 1.0

  600 mins*

  This fully online OSHA 10-Hour General Industry course is tailored for high-tech and semiconductor workplaces. Topics include hazard communication, PPE, ergonomics, and electrical safety. Participants who complete the training will receive an official OSHA 10 DOL card issued by the U.S. Department of Labor.

  Download PDF

  $69.00

• OSHA 10: General Industry Outreach Training Course (High-Tech/Semiconductor) (Actively Proctored)

  

  IACET CEUs Awarded

  CEUs: 1.0

  600 mins*

  This fully online OSHA 10-Hour General Industry course for semiconductor workers is proctored to satisfy New York law. It covers hazard recognition, PPE, ergonomics, and electrical safety. Participants who complete the training will receive an official OSHA 10 DOL card issued by the U.S. Department of Labor.

  Download PDF

  $69.00

• OSHA 10: General Industry Outreach Training Course Spanish

  

  IACET CEUs Awarded

  CEUs: 1.0

  600 mins*

  Este curso en línea de 10 horas de OSHA para la Industria General, completamente en español, ofrece capacitación en seguridad sobre equipo de protección personal (EPP), riesgos eléctricos, comunicación de riesgos y ergonomía. Los participantes que completen la capacitación recibirán una tarjeta oficial OSHA 10 emitida por el Departamento de Trabajo de los Estados Unidos (DOL).

  Download PDF

  $69.00

• OSHA 10: General Industry Outreach Training Course Spanish (Actively Proctored)

  

  IACET CEUs Awarded

  CEUs: 1.0

  600 mins*

  Este curso en línea de 10 horas de OSHA para la Industria General, completamente en español, cuenta con supervisión para cumplir con la ley del estado de Nueva York. Cubre equipo de protección personal (EPP), seguridad de maquinaria, comunicación de riesgos y seguridad eléctrica. Los participantes que completen la capacitación recibirán una tarjeta oficial OSHA 10 emitida por el Departamento de Trabajo de los Estados Unidos (DOL).

  Download PDF

  $69.00

• OSHA 30: Construction Industry Outreach Training Course

  

  IACET CEUs Awarded

  CEUs: 3.0

  1800 mins*

  This fully online OSHA 30-Hour Construction Outreach course offers advanced safety training for supervisors and workers. Topics include fall protection, scaffolding, electrical hazards, and more. Participants who complete the training will receive an official OSHA 30 DOL card issued by the U.S. Department of Labor.

  Download PDF

  $169.00

• OSHA 30: Construction Industry Outreach Training Course (Actively Proctored)

  

  IACET CEUs Awarded

  CEUs: 3.0

  1800 mins*

  This fully online OSHA 30-Hour Construction Outreach course is proctored to satisfy New York law. It provides in-depth training on PPE, hazard recognition, fall protection, and worker rights. Participants who complete the training will receive an official OSHA 30 DOL card issued by the U.S. Department of Labor.

  Download PDF

  $169.00

• OSHA 30: Construction Industry Outreach Training Course Spanish

  

  IACET CEUs Awarded

  CEUs: 3.0

  1800 mins*

  Este curso en línea de 30 horas de Capacitación en Construcción de OSHA, originalmente en español, ofrece capacitación avanzada en seguridad que abarca protección contra caídas, andamios, equipo de protección personal (EPP) y prevención de riesgos. Los participantes que completen la capacitación recibirán una tarjeta oficial OSHA 30 emitida por el Departamento de Trabajo de los Estados Unidos (DOL).

  Download PDF

  $169.00

• OSHA 30: Construction Industry Outreach Training Course Spanish (Actively Proctored)

  

  IACET CEUs Awarded

  CEUs: 3.0

  1800 mins*

  Este curso en línea de 30 horas de Capacitación en Construcción de OSHA cuenta con supervisión para cumplir con la ley del estado de Nueva York. Ofrece una capacitación detallada sobre equipo de protección personal (EPP), identificación de riesgos, protección contra caídas y derechos de los trabajadores. Los participantes que completen la capacitación recibirán una tarjeta oficial OSHA 30 emitida por el Departamento de Trabajo de los Estados Unidos (DOL).

  Download PDF

  $169.00

• OSHA 8 Hour HAZWOPER Supervisor Initial

  

  Required for supervisors managing hazardous waste operations, this course focuses on supervisory responsibilities under OSHA HAZWOPER. Topics include site safety plans, hazard assessment, employee protection, regulatory compliance, incident investigation, and effective safety leadership.

  $65.00

• OSHA 8 Hour HAZWOPER Supervisor Refresher

  

  This annual refresher course keeps supervisors current with OSHA HAZWOPER requirements. It reviews regulatory updates, safety management responsibilities, hazard recognition, emergency response procedures, and best practices for maintaining a compliant and safe worksite.

  $65.00

• OSHA Focus Four

  

  IACET CEUs Awarded

  CEUs: 0.4

  120 mins*

  The Construction Focus Four Training in made of the following sections, Fall Protection, Electrocution Hazards, Caught In/Between Hazards and Struck By Hazards. These sections cover four of the key hazards that might be encountered on construction sites.

  Download PDF

  $49.00

• Pallet Jack

  

  IACET CEUs Awarded

  CEUs: 0.1

  25 mins*

  This course will show how Pallet Jacks can be operated safely in a workplace environment along with how different locations and terrains require additional safety precautions. It covers the different types of pallet jacks and how they should be treated and operated accordingly. The course concludes by covering the requirements of inspection and maintenance of the vehicle.

  Download PDF

  $35.00

• Permit Required Confined Spaces

  

  IACET CEUs Awarded

  CEUs: 0.1

  30 mins*

  This course provides you with general industry key concepts and understanding of identifying permit required confined spaces. It will expose you to the complex hazards associated with them and you will learn about detailed strategies to assess, control and maintain worker safety. You will discover processes involved in the pre-entry preparation and the practices necessary for safe working.Finally, you will be introduced to the safety practices of atmospheric testing and the roles and responsibilities required to manage permit required confined spaces, in the general industry.

  Download PDF

  $35.00

• Personal Protective Equipment (PPE)

  

  IACET CEUs Awarded

  CEUs: 0.1

  60 mins*

  Personal Protective Equipment is a key aspect in workplace safety across a wide variety of industries. It serves as a means of protection and prevention from injury, either being worn or used by the individual, it helps to maintain the safety of workers carrying out hazardous tasks.

  Download PDF

  

  $35.00

• Recording and Reporting to OSHA

  

  IACET CEUs Awarded

  CEUs: 0.1

  60 mins*

  In this course you'll learn how to record workplace injuries and illness to meet the requirements of the Occupational Safety and Health Administration (OSHA). Please be aware that this course contains detailed descriptions of injuries to clarify the kinds of injuries that are recordable or reportable.

  Download PDF

  

  $69.00

• Respiratory Protection

  

  IACET CEUs Awarded

  CEUs: 0.1

  60 mins*

  This course will examine OSHA regulations including employers' and employees' safety responsibilities. You'll learn about Personal Protective Equipment along with air-purifying respirators and filtration methods, plus the importance of Permissible Exposure Limits. We'll describe the main types of Self-Contained Breathing Apparatus and air-supplied respirators for use in oxygen-deficient atmospheres, along with half- and full-face facepieces, and Negative and positive Pressure Respirators. On a more practical front, we'll show how to fit, check, wear and use your respirator correctly.

  Download PDF

  $35.00

• Safety Orientation in Construction

  

  IACET CEUs Awarded

  CEUs: 0.2

  54 mins*

  This course provides you with a comprehensive introduction to Safety in Construction.

  Download PDF

  $35.00

• Scaffolding for Construction

  

  IACET CEUs Awarded

  CEUs: 0.1

  30 mins*

  This course starts by reviewing the fundamentals of scaffolding, where we address the core components, from crucial safety regulations to proper maintenance procedures. This segment is tailored to provide construction workers with the skills needed for safe and productive work practice. Following this, the course covers the vital competencies required for the safe assembly and disassembly of scaffolding structures. Our guidance will navigate you through the necessary procedures, emphasizing the assurance of structural integrity and adherence to comprehensive safety standards at every stage.

  Download PDF

  Also available as part of a bundle

  $35.00

  Also available as part of a bundle

• Slips, Trips and Falls

  

  IACET CEUs Awarded

  CEUs: 0.1

  60 mins*

  This course covers Slips, Trips, and Falls, the injuries they can cause in the workplace, and the safety controls and systems that can be put in place. The course starts by describing the relevant Slips, trips and falls laws, and how OSHA sets federal standards for hazard identification, prevention, and compliance. You'll see how to create a slips, trips and falls map as a way of identifying hazards and developing safety controls. Finally, we'll help you understand the human factors that can cause slips, trips and falls.

  Download PDF

  

  $35.00

• Struck by Hazards

  

  IACET CEUs Awarded

  CEUs: 0.1

  60 mins*

  This course is part of OSHA’s Focus Four topics, Struck-By Hazards in the Construction industry. The course starts by diving into the fundamental concepts of struck-by hazards on construction sites, their prevalence, and the importance of recognizing them to ensure safety.

  Download PDF

  

  $35.00

• Telehandlers

  

  IACET CEUs Awarded

  CEUs: 0.1

  25 mins*

  Telehandlers are essential in various industries for lifting and transporting materials. As versatile machinery, they require specific safety measures to protect operators and other workers. Proper use and adherence to safety guidelines are crucial to prevent accidents and ensure the smooth execution of tasks.

  Download PDF

  $35.00

• Trenching and Excavating Safely

  

  IACET CEUs Awarded

  CEUs: 0.2

  120 mins*

  This online course will provide valuable information on the key safety aspects of trenching and excavation. When you’ve finished the course, you will understand the serious issues raised, and be able to play your part in ensuring a safer work environment.

  Download PDF

  

  $99.00

• Walking Working Surfaces and Fall Protection

  

  IACET CEUs Awarded

  CEUs: 0.1

  60 mins*

  This course provides you with an introduction to safe practices related to walking-working surfaces, ladders, stairs, fall protection and protection from falling objects. This course will then help you to examine the significant role that specialized protective gear and essential safety tools play in building a strong workplace safety culture. The course will guide you through the essential systems intended to prevent falls, alongside the crucial safety measures that protect workers, underscoring the importance of preparation for when proactive steps alone are insufficient.

  Download PDF

  $35.00

• Workplace Violence

  

  IACET CEUs Awarded

  CEUs: 0.2

  90 mins*

  This course deals with violence and sexual harassment in the workplace. It’ll provide statistics showing the extent of workplace violence, before examining perpetrator profiles and the industries and jobs where the risk is highest. Please be aware that this course discusses sensitive topics including sexual harassment, violence and rape.

  Download PDF

  Also available as part of a bundle

  

  $55.00

  Also available as part of a bundle